Dji MG-1P User Manual

Loading ...

AGRAS MG-1P SERIES User Manual

Smart RTH

Press and hold the RTH button on the remote controller when GNSS is available to enable Smart

RTH. Both Smart and Failsafe RTH use the same RTH procedure. With Smart RTH, you may control

the aircraft’s speed and altitude to avoid collisions when returning to the Home Point. The Aircraft

Status Indicators will show the current ight mode during RTH. Press the RTH button once or toggle

the Pause switch to exit Smart RTH and regain control of the aircraft.

Failsafe RTH

Failsafe RTH must be enabled in the DJI MG app. If Failsafe RTH is not enabled, the aircraft

will hover in place when the remote controller signal is lost.

Failsafe RTH activates automatically if the remote controller signal is lost for more than three

seconds, provided that the Home Point has been successfully recorded, the GNSS signal is strong

(white GNSS icon), and the compass is working normally. Users can interrupt the Return to Home

procedure and regain control of the aircraft if the remote controller signal is recovered. Press the

RTH button once or toggle the Pause switch to cancel RTH.

5. Initiate RTH

Blinks yellow

1. Record Home Point (HP)

Blinks green or purple

3. Remote Controller Signal Lost

Blinks yellow

2. Conrm Home Point

Blinks green six times

6. Land After Hovering 5 sec

Blinks yellow

4. Signal Lost > 3 sec

Blinks yellow

15m

Height over HP>15m

Elevate to 15m

Height over HP<=15m

Updating the Home Point

You can update the Home Point in the DJI MG app during ight. There are two options for setting

the Home Point:

1. Set the aircraft’s current coordinates as the Home Point.

2. Set the remote controller’s current coordinates as the Home Point.

Ensure the space above the remote controller’s GNSS module (located beneath the DJI

logo) is not obstructed and that there are no tall buildings around when updating the Home

Point.

Follow the instructions below to update the Home Point:

1. Go to DJI MG > Operation View.

2. Tap

> , select in Home Point settings to set the aircraft’s current coordinates as the

Home Point.

Loading ...

Dji MG-1P