MATRICE 300 RTK User Manual

Loading ...

1. The Front LEDs show the orientation of the aircraft.

2. The Aircraft Status Indicators communicate the system status of the ight controller. Refer to the

table below for more information about the Aircraft Status Indicators.

The Front LEDs, and Aircraft Status Indicators can be turned off in the DJI Pilot app for

unobtrusive drone operations.

Aircraft Status Indicator Description

Normal

Red, green, and yellow ashes Turning On and Self Diagnostic Testing

Slow green ashing P-mode with GNSS positioning*

×2 Two green ashes P-mode with Vision Systems*

Alternating green and blue

ashing

The RTK function is enabled and RTK data is

used.

Slow yellow ashing A-mode (no GPS and vision positioning)

Fast green ashing Braking automatically after obstacle detected

Warning

Fast yellow ashing Remote Controller Signal Lost

Slow red ashing Low Battery Warning

Front LEDs Aircraft Status Indicators

In Attitude mode, the Vision System and some advanced features are disabled. Therefore, the

aircraft cannot position or auto-brake in this mode and is easily affected by its surroundings, which

may result in horizontal shifting. Use the remote controller to position the aircraft.

Maneuvering the aircraft in Attitude mode can be difcult. DO NOT y the aircraft too far away

as you might lose control and cause a potential hazard. Avoid ying in areas where GNSS signal

is weak, or in narrow and conned spaces. The aircraft will otherwise be forced to enter Attitude

mode, leading to potential ight hazards, please land it in a safe place as soon as possible.

Flight Status Indicator

The aircraft features Front LEDs, and Aircraft Status Indicators. The positions of these LEDs are

shown in the gure below:

Loading ...

Dji MATRICE 300 RTK Camera