Loading ...
Loading ...
Loading ...
80
M16 Camera Manual: Installation
2.5 Mounting the Camera with Pole Mount (Accessories)
If you are intending to install the camera on a pole, you should consider using the MOBOTIX
M16 pole mount. This mount is made of 3-mm powder-coated stainless steel (white) and
has been designed specically for outdoor use. The supplied stainless steel straps allow
the mount to be attached to poles with diameters between 60 mm and 180 mm. By design,
the pole mount does not allow the use of an in-wall socket. We recommend using an
MX-Patch-Box that can be easily inserted into the cavity socket of the wall mount (VarioFlex
mount) in order to ensure a weatherproof connection of the network devices. For more
information on the MX-Patch-Box, please visit www.mobotix.com and go to the
Product
Selector > Accessories > Interface Boxes
section.
The camera is always installed together with the VarioFlex
mount, which is shipped as a wall mount, and can also
be installed directly on the pole mount. The best camera
position for the selected sensor module must be found
before installing the camera (see Section 2.2, «First
Installation Steps»). You can ne-tune its position once
the camera has been installed on the wall.
Loading ...
Loading ...
Loading ...