Loading ...
Loading ...
Loading ...
61
First Installation Steps
2.2 First Installation Steps
2.2.1 InitialInstallationoftheSensorModules(ExceptM16CompleteCameras)
The MOBOTIX M16 cameras are delivered with a pre-assembled housing as M16 Body
camera. The sensor modules (consisting of lens carrier, image sensor and lens) need be
ordered separately. Upon delivery, the sensor module sockets in the front element are
tted with transport plugs. When operating the camera, it needs to be tted either with
sensor or blind modules. This closes o the front element and protects the camera against
foreign objects, insects and water.
Caution
Only replace the sensor modules when the camera is disconnected from the power
supply. Make sure the power supply to the camera is disconnected before installing
or replacing sensor modules.
When installing the sensor modules, make sure that the sensor module cables and
the patch cable are not damaged or bent sharply.
Using One or Two Sensor Modules
With an M16, you have the choice of using the camera with one or two sensor modules.
Since the modules are easily exchanged, it is also possible to add a module or to use dif
-
ferent ones later on.
Caution
Note that you must not operate the M16 with installed transport plugs, since the
camera is not protected against the environments:
M16 with one blind module:
Unrestricted operation
(IP66)
M16 with two transport plugs:
No operation allowed!
M16 with one transport plug:
No operation allowed!
Not required with M16
Complete Camera
(see Section 1.3.6)
MOBOTIX Tutorials:
www.mobotix.com/en/
support/download-
center/documentation/
brochures-guides
Transport plug
Loading ...
Loading ...
Loading ...