Loading ...
Loading ...
Loading ...
78
M16 Camera Manual: Installation
Procedure
1. Convert to a ceiling mount: Simply remove the lock screw on the central joint and
exchange the wall mount for the supplied ceiling mount. Before fastening the ceiling
mount to the central joint (using the screw of the wall mount), the patch cable is
guided through one of the four openings.
2.
Install and prepare the network connection: Guide
the pre-installed camera patch cable through one
of the four openings in the ceiling mount (this will
be connected later with the network cable using a
suitable adapter, for example, in an existing cavity
socket).
3. Drill the holes:Use the drilling template for the
camera (available on www.mobotix.com >
Download Center > Documentation > Manuals).
Drill the holes for the supplied screw anchors. Screw
anchors do not have to be tted if the surface is
made of wood. To secure the mount, the supplied
stainless steel hex head screws will be screwed
directly into the surface later on. You should start
with a 2-mm drill bit, for example (drilling depth just
slightly less than screw length), in order to facilitate
screwing in wood.
4. Attach ceiling seal: Place the white rubber seal
with the groove on the edge of the ceiling mount.
5. Connect the cable: Connect camera patch cable
via connector. Make sure that the cable is not bent
or squashed.
No screw anchors are requi-
red for wooden surfaces
Additional sealing
possible, for example,
with shrink tubing
Loading ...
Loading ...
Loading ...