Loading ...
Loading ...
Loading ...
131
Conguration in the Browser
more events: playing back an alarm sound on the camera speaker, showing the visual
alarm in the camera live image, sending an e-mail or IP Notify with the alarm image,
placing a phone call, uploading an alarm image to an FTP server, switching a signal
output line of the camera (for example, for switching on the lights/opening a door).
For the settings, see Setup Menu > Action Group Overview. The actions to be per
-
formed are dened and used in these action groups in the form of “action proles.”
The dierent action proles can also be dened in the following areas: Admin Menu
in the Hardware Conguration (proles for signal output), Transfer Proles (FTP,
e-mail, IP Notify) and Sound and VoIP Telephony (sound proles, VoIP proles). For
more information, refer to the online help for the Action Group Overview dialog box.
•
Activate shock detector: The M16 is also equipped with a shock detector as standard.
If, for example, the camera’s housing receives a blow, it automatically registers it and
sends a notication via an IP Notify or telephone call. A general advantage is that
MOBOTIX cameras are extremely tough, not least because of the absence of mecha
-
nical moving parts. This typically allows them to stay fully operational, in particular,
when they are subject to strong vibrations. Open the Setup Menu > Event Control >
Environment Events > Edit dialog box if you would like to activate the shock detector
(and any other sensors).
3.6.3 ConguringtheM16-Thermal(-TR)intheBrowser
Modifying the Display Options of the Thermal Image Sensor
By factory default, the color palette for displaying the thermal image sensor has been set
to
Grayscale
and the palette is shown at the bottom of the image. In order to change the
display of the thermal sensor, open the Setup Menu > Thermal Sensor Settings dialog
in the browser, select a dierent palette in the Color Palette dropdown and click on Set.
Use the Show Color Palette option to control whether or not the palette is shown at the
bottom of the image. See the
Thermal Sensor Settings
help page for further information
on the available options.
Events Used by Thermal Image Sensors (Non-TR)
Only the Video Motion and MxActivitySensor events are available for the thermal image
sensor. These events can be congured in the Setup Menu > Event Overview dialog
in the Image Analysis Events and Environment Events section. Starting with soware
release V4.3.4.66, this includes the ability to measure temperatures using the
Thermal
Spotmeter
in the image center (four pixels) and trigger events if the temperature exceeds
or drops below the specied value. By design it is not possible to recognize illumination
events on the thermal sensor. For the same reason, there aren’t any exposure settings for
this type of image sensor.
ExtendedFeaturesforCameraswithThermalRadiometry(-TR)
Thermal sensors with
TR technology
(
TR = Thermal Radiometry
) can measure temperature
values in the entire image area and can trigger events. For this purpose, the environment
Loading ...
Loading ...
Loading ...