Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/48924649-mx-m16b/bg46.png)
70
M16 Camera Manual: Installation
Notes
Aer you have connected an MxBus module, you need to activate it in the camera's
browser interface (Admin Menu > Manage Hardware Expansions or Manage MxBus
Modules, respectively).
2.2.8 Closing the Camera Housing
Once you have completed the tasks in the interior of the M16, you need to reassemble the
front element of the M16. Make sure that you are reconnecting all plugs as shown in the
gure if you removed any of them:
Procedure
1. Before inserting the front element, make sure that
the sensor module cables of both image sensors
are running at the inside of the screw bore (see red
arrow).
The sensor cables must not run along the
outside of the screw bores (see gure below)!
Sensor module cable
right
Sensor module cable
le
I/O cable to front ele-
ment (red clips!)
Loading ...
Loading ...
Loading ...