Loading ...
Loading ...
Loading ...
54
M16 Camera Manual: Installation
Wall Installation
The M16 can be installed on the wall of a building or structures, even mobile surfaces, for
both indoor and outdoor use. The camera is mounted using the pre-installed VarioFlex
mount (supplied as standard), which is easily secured using the four enclosed screws and
screw anchors (depending on the surface, it can also be mounted without screw anchors
directly over the in-wall socket). The Ethernet connection cable of the camera has already
been guided through the mount and simply needs to be connected with the network cable
on-site (for example, using the MX-Patch-Box). By adjusting the VarioFlex mount as required,
the captured image area can be precisely adjusted to the desired practical application. The
cameracanbeturnedortilted180°horizontallyand80°vertically(from-60°to+20°).
Ceiling Installation
By exchanging the wall mount for the separately supplied ceiling mount, the M16 is ready
to be installedonceilingsinjustafeweasysteps thanks to the VarioFlex system. This
installation option is of particular benet when monitoring rectangular rooms with a sin
-
gle camera. In such cases, the B041 sensor module with Super Wide-Angle lens allows
the room to be monitored almost entirely by an M16 installed on the ceiling in one of the
corners. Using the PTZ soware, you can easily zoom in on image details in either the live
image or the recording. Thecameracanbeturnedortilted360°horizontallyand107°
vertically(from-90°to+17°).
-60°
+20°
Wall installation
Wall installation
• Horizontal: 180°
• Vertical: -60° to +20°
360°
Ceiling installation
Loading ...
Loading ...
Loading ...