Loading ...
Loading ...
Loading ...
132
M16 Camera Manual: Operating The Camera
events now include the Thermal Radiometry event type, which can be used to trigger
alarms if specic temperature changes in the image are detected.
Using this event type, you can create up to 20 event proles, each dening a measurement
window within the image area. For every measurement window, you can set a minimum
range and a trigger value and you can decide if the event should trigger if the temperature
exceeds or drops below the specied value. The minimum range sets the number of pixels
in the measurement window, which need to have a higher or lower temperature than the
trigger value in order to trigger an event. To congure the new event type,. open the Setup
Menu > Event Control > Event Overview dialog in the Environment Events section.
Notes
• You can only use events of the type Thermal Radiometry if the sensor is running
in
linear mode
. To use this mode, open Setup Menu > Image Settings > Thermal
Sensor Settings and activate the Linear Mode option. Note that this has already
been set for sensors with TR technology as factory default.
• If you want to use MxActivitySensor on sensors with TR technology, it is recom
-
mended to set the value range of the measured temperatures in the Setup Menu >
Image Settings > Thermal Sensor Settings dialog to
Small (high sensitivity)
.
Important Notes on Temperature Measurement
The temperatures of objects in the image measured by thermal sensors is strongly
inuenced by the following factors (among others):
• Surface texture and color of the objects
• Distance between objects and the sensor
• Atmosphere between objects and the sensor
Depending on the distance and the scene, dierent temperature values for the same
object can be observed. In order to determine the proper trigger value, you can use the
new variables $(SEN.TTR.CELSIUS) and $(SEN.TTR.FAHRENHEIT) (see
Using
Variables
in the camera’s online help).
For further information on conguring and using thermal sensors, please see the online
help of the camera in the Setup Menu section under
Thermal Sensor Settings
and
Events
based on environment measurements
.
Loading ...
Loading ...
Loading ...