Loading ...
Loading ...
Loading ...
53
Preparing the Installation
The VarioFlex mount consists of a central joint, which is directly screwed into place with
the M16 housing, and a wall and ceiling mount, which is fastened to the central joint
with just one screw. In addition to being easy to install, the VarioFlex mount enjoys the
advantage of featuring completely concealed cabling and high impermeability to water
and dust (IP66). Wall and ceiling mounts are designed such that they can be installed
over conventional in-wall sockets (without the frame) or cavity sockets and conceal them
completely. A MOBOTIX interface box can be integrated in the wall mount.
Make sure that you have found the best camera position before installing the camera. It is
important that the camera’s eld of view is not obstructed in any way. Once the camera
has been installed on a wall or ceiling, you can ne-tune its position. If the monitored area
changes or the camera has to be installed in a dierent location, it is easy to exchange
the camera’s sensor modules and continue using the camera, without having to upgrade
to new video soware.
360°
Ceiling instal-
lation
Weather
protection
Ceiling mount
-60°
+20°
Wall installation
Wall mount
Central joint
Tilting the camera when
installed on a wall
• Horizontal: 180°
• Vertical: -60° to +20°
Tilting the camera when
installed on a ceiling
• Horizontal: 360°
• Vertical: -90° to +17°
Space for RJ45 in-wall socket/concealed cabling
VarioFlex wall mount with
protected cabling and cover
for in-wall sockets and
MOBOTIX interface boxes
Loading ...
Loading ...
Loading ...