Hikvision DS-K1A340WX User Manual

Loading ...

Oponal: Set the switch on the upper right corner to ON to trigger the alarm output.

Congure Parameters for Lane Controller

Aer adding the lane controller to the client, you can congure its parameters for passing through

the lane.

Before You Start

Add access control device to the client.

Steps

Click Access Control → Advanced Funcon → Device Parameter to enter Parameter Sengs

page.

In the device list on the le, select a lane controller and you can edit the lane controller's

parameters on the right.

Edit the parameters.

Passing Mode

Select the controller which will control the barrier status of the device.

●

If you select According to Lane Controller's DIP Sengs, the device will follow the lane

controller's DIP sengs to control the barrier. The sengs on the soware will be invalid.

●

If you select According to Main Controller's Sengs, the device will follow the sengs of

the soware to control the barrier. The DIP sengs of the lane controller will be invalid.

Free Passing Authencaon

If you enable this funcon, when both entrance and exit's barrier mode is Remain Open, the

pedestrians should authencate each me passing through the lane. Or an alarm will be

triggered.

Opening/Closing Barrier Speed

Set the barrier's opening and closing speed. You can select from 1 to 10. The greater the

value, the faster the speed.

Note

The recommended value is 6.

Audible Prompt Duraon

Set how long the audio will last, which is played when an alarm is triggered .

Note

0 refers to the alarm audio will be played unl the alarm is ended.

Temperature Unit

Select the temperature unit that displayed in the device status.

Click OK.

DS-K1A340 Series Face Recognion Terminal User Manual

118

Loading ...

Hikvision DS-K1A340WX Value Series Face Access Terminal