Hikvision DS-K1A340WX User Manual

Loading ...

10.7.1 Congure Device Parameters

Aer adding the access control device, you can congure the parameters of access control device,

access control points.

Congure Parameters for Access Control Device

Aer adding the access control device, you can congure its parameters, including overlaying user

informaon on picture, uploading pictures aer capturing, saving captured pictures, etc.

Before You Start

Add access control device to the client.

Steps

Click Access Control → Advanced Funcon → Device Parameter .

Note

If you can not nd Device Parameter in the Advanced Funcon list, hover the cursor on the

Advanced Funcon, and then Click to select the Device Parameter to be displayed.

Select an access device to show its parameters on the right page.

Turn the switch to ON to enable the corresponding funcons.

Note

●

The displayed parameters may vary for dierent access control devices.

●

Some of the following parameters are not listed in the Basic Informaon page, click More to

edit the parameters.

RS-485 Comm. Redundancy

You should enable this funcon if you wire the RS-485 card reader to the access control

device redundantly.

Display Detected Face

Display face picture when authencang.

Display Card Number

Display the card informaon when authencang.

Display Person Informaon

Display the person informaon when authencang.

Overlay Person Info. on Picture

Display the person informaon on the captured picture.

Voice Prompt

If you enable this funcon, the voice prompt is enabled in the device. You can hear the voice

prompt when operang in the device.

DS-K1A340 Series Face Recognion Terminal User Manual

114

Loading ...

Hikvision DS-K1A340WX Value Series Face Access Terminal