Loading ...
Loading ...
Loading ...
UTD1000L User Manual 87
The battery may not be fully charged during the delivery, it must take four hours to fully
charge the battery. The battery can work for 8hours after full charge.
When powered by the battery, the Oscilloscope indicates battery working status on the
upper part of screen.battery indicators may include: , , , , . And
icon means there is only five minutes left before the Oscilloscope powers off. Please
connect the power adaptor to the Oscilloscope if you want to charge the battery and use the
Oscillosocpe at the same time
Caution:
To avoid over-heating when charging the battery, environment temperature shouldn’t
exceed allowable rated value(0℃～+40℃).
Note:
There is no danger involved even the Oscilloscope has been connected to the charger
for a long time, for instance, during the whole weekend, for the Oscilloscope can
automatically switch into very slow charging status.
Replacing Lithium Batttery Pack
The battery pack doesn’t need the replacement under general circumstances. If
necessary, please have the battery pack replaced by qualified personnel and use new battery
with the same specifications.
Appendix C Chinese-English Reference Table for Front Panel
Front Panel in English Front Panel in English
DSO SINGLE
DMM SELECT
ACQUIRE
AUTO
DISPLAY
RUN/STOP
CONFIGURE
UTILITY
CURSOR
TRIGGER
MEASURE HELP
STATUS HORIZONTAL
MATH SHIFT
CHANNEL V/mV
STORAGE s/ns
RECORD OK
REF
V
I
R
Loading ...
Loading ...