Loading ...
Loading ...
Loading ...
32 UTD1000L User Manual
Chapter 5 Using the Multimeter
5.1 About the Chapter
This chapter introduces the multimeter functions built in the Oscilloscope; examples are also
offered to illustrate how to use the menus and the basic measurements. To switch from
Oscilloscope mode to Multimeter mode, press DMM/DSO button to access DMM mode, the
display screen will change into multimeter interface accordingly.
5.2 Connections to the Multimeter
UTD1000L has two multimeter input terminals: COM, V/Ω, matched to 4-mm banana plugs of
test leads.
UTD1000DL: One UT-M04 (4A current divider) and one UT-M10 (mA current module) are also
offered to use in the measurements
UTD1000CL: One UT-M07 (6A current divider) is also offered to use in the measurements
5.3 Display Indicators
Description:
1. Battery Indicator
2. AUTO Autoset indicator
3. Indicators for Measurement Types:
DC Voltage Measurement
AC Voltage Measurement
DC Current Measurement
AC Current Measurement
Resistance Measurement
Diode Test
Continuity Test
Capacitance Measurement
4. Relative Measurement
5. working statusIndicator; HOLD : Freeze the display
6. Main Display for Measuring Values
7. Manual Ranging Indicator
5.4 Making Multimeter Measurements
Press DSO/ DMM button to access DMM mode, the display then enters into the multimeter
interface. Multimeter functions are ready to use at the moment.
5.4.1 Measuring Resistance
To measure resistance, do the following:
1. Press down R button to set measurement type to Resistance.
2. Plug test lead connectors into multimeter input terminals (Black to COM and Red to V/Ω).
3. Connect test leads respectively to the resistor under test, then take resistance readings.
Loading ...
Loading ...
Loading ...