Loading ...
Loading ...
Loading ...
34 UTD1000L User Manual
4. Connect test leads to tested points. The multimeter will beep if tested resistance between
tested points is lower than70Ω.
Figure 5-3 Testing for Continuity
5.4.4 Measuring Capacitance
To measure capacitance, do the following:
1. Press R to set the measurement type to Resistance.
2. Press F1 button to switch measurement type to Capacitance.
3. Plug test lead connectors into multimeter input terminals (Black to COM and Red to V/Ω).
4. Connect test leads to the capacitor under test, then take the reading.
Note: To ensure the accuracy, please use the relative mode if test capacitance is ＜5 nF.
Figure 5-4 Measuring Capacitance
5.4.5 Measuring DC Voltage
To measure DC voltage, do the following:
1. Press down V button to set measurement type to DC Voltage.
Loading ...
Loading ...
Loading ...