Loading ...
Loading ...
Loading ...
UTD1000L User Manual 33
Figure 5-1 Measuring Resistance
5.4.2 Testing Diodes
To test the diode, do the following:
1. Press R button to set the measurement type to Resistance.
2. PressF1 button to select Diode option.
3. Plug test lead connectors into multimeter input terminals (Black to COM and Red to V/Ω).
4. Connect test leads to the tested diode, then forward voltage drop reading for the diode
displays, accompanied by the measurement unit V.
Fgiure 5-2 Testing Diode
5.4.3 Testing for Continuity
To check the continutity, do the following:
1. Press R to set the measurement type to Resistance.
2. PressF1 button to select Continutity.
3. Plug test lead connectors into multimeter input terminals (Black to COM and Red to V/Ω).
Loading ...
Loading ...
Loading ...