Loading ...
Loading ...
Loading ...
UTD1000L User Manual 71
Trigger
Cursor
waveform;
Use arrow buttons to set the target to trigger level;
Use arrow buttons to set the target to the cursors,
press SELECT to select between Cursor 1 and Cursor
2.
Figure 6-29 Cursor Menu for Voltage Measurement
Table 6-16
Menu
Settings
Description
Type
Voltage
Use the cursor to measure the voltage
Mode Independent
Tracking
Move each cursor independently
Move two cursors simultaneously and keep ΔV
unchanged
Func Switch Channel
Trigger
Cursor
Use arrow buttons to set the target to channel
waveform;
Use arrow buttons to set the target to trigger level;
Use arrow buttons to set the target to the cursors,
press SELECT to select between Cursor 1 and Cursor
2.
6.10 Interface Setup
To set up the display interface for the Oscilloscope, do the following:
1. Press SHIFT, shift icon shows on uppert right corner of display.
2. Press CONFIGURE to enter into diplay configuration menu;
Table 6-17
Functional Menu Settings Description
Language Multilingual To select the desired language
Loading ...
Loading ...
Loading ...