UNI-T UTD1025DL Multimeter/Oscilloscope

UTD1000L Series user manual - Page 71

For UTD1025DL.

PDF File Manual, 91 pages, Read Online | Download pdf file

UTD1025DL photo
Loading ...
Loading ...
Loading ...
UTD1000L User Manual 69
section for recall setup)
menu is on.
6.8.3 Recalling
To recall the waveforms, press SHIFTbutton and shift icon shows on the upper right part of
screen; then press REF to access waveform recall menu.
Figure 6-27 Recall Reference Waveforms
Set up as shown in the following table:
Table 6-14
Settings Description
Ref Wave REF A
REF B
UTD1000L can recall REFA or REFB individually or both of them
at the same time.
Location 1-20 Use Right and Left buttons to select the location to be recalled.
Recall To begin the recalling
Clear For Model UTD1000L, its used to turn off current
waveform(REFA or REFB)
Case 1: To save and recall channel waveforms to the internal channel:
Saving Waveforms
1. Press SHIFT and shift icon shows on upper right part of screen;
2. Press STORAGE to access storage menu;
3. Press F1 to set Type to Waveform;
4. Press Left&Rightbuttons to set Location to 1; press F3 to select target Source; (Only
available in UTD1000DL)
5. Press F3 of UTD1000CL to save, and also F3button for UTD1000DL, then “storage
success” shows on the display , indicating the waveform has been successfully saved
into the Oscilloscope;
Recalling Waveform
6. Press SHIFT, shift icon shows on upper right part of display.
7. Press REF to access waveform recall menu;
8. Press F1 of UTD1000L to select between REFA or REFB;
9. Press Left &Right arrow buttons to set Location to 1;
Loading ...
Loading ...
Loading ...