Loading ...
Loading ...
Loading ...
36 UTD1000L User Manual
1. Press I button to set measurement type to DC Current, the measurement unit is μA, you
can use F3 to toggle betweenμA, mA and A ranges, the default is mA
2. Plug test lead connectors into input terminals(Black to COM and Red to μA/mA )
3. Then connect test leads to tested points, than take the DC current reading.
Figure 5-7 Measuring DC Current lower than 4Ma
To measure DC current lower than 400mA, do the following:
1. Press I button to set measurement type to DC Current,
2. Press F3 button to select mA range, andmeasurement unit will be mA .
3. Plug test lead connectors into input terminals(Black to COM and Red to μA/mA )
4. Then connect test leads to tested points, than take the DC current reading.
Figure 5-8 Measuring DC Current lower than 400mA
To measure DC current equal to or greater than 400mA, do the following:
1. Press I button to set measurement type to DC Current
2. Press F3 button to select A range, and measurement unit will be A .
3. Plug10A Current divider module (UT-M07) into input terminals COM and μA /mA, then
connect black and red test lead connectors respectively to the module (UT-M07)
4. Then connect test leads to tested points, than take the DC current reading.
Warning: If test leads are connected to COM and μA /mA without use of 10A Current divider
module (UT-M07) when measuring current greater than 400mA, the fuse in the product will be
burnt out. Please have the fuse replaced by qualified personnel if the incident happens.
Loading ...
Loading ...
Loading ...