Loading ...
Loading ...
Loading ...
UTD1000L User Manual 25
2. Press CONFIGUREbutton to switch on display configuration menu;
3. Press F4 button, then details such as oscilloscope model, version will show on the screen;
4. PressF1 button to switch off the displayed window.
Figure 4-15 System Information
4.19 Making Auto Measurements
There are two kinds of auto measurements available in the Oscilloscope: Measure all or
customized parameters. Maximum 4 parameters can be selected if you want to customize your
own measurements.
4.19.1 Measuring All Parameters
To measure automatically all parameters, do the following:
1. Press MEASURE button to display measurement menu;
2. PressF2, then the screen will show measurement results for all parameters.
Note:
1） Switching between different signal sources in UTD1000DL will change the paramteters
accordingly for channels;
2） If the signal is input into only one channel of UTD1000DL, the rise delay, fall delay and
phase parameters will not be measured when this channel is choosen as the signal source;
or the signal source is set to the channel without signal input, no parameter measurement
will be made.
Loading ...
Loading ...
Loading ...