Loading ...
Loading ...
Loading ...
UTD1000L User Manual 47
Chapter 6 Using the Oscilloscope in Details
6.1 About the Chapter
This chapter offers a step-by-step introduction on UTD1000L Series functions. Detail
information about functional buttons on the front panel and operation examples are included
here.It is recommended that you should read through this chapeter in order to get more and
systematic knowledge of the Oscilloscope.
6.2 Setting Vertical System
6.2.1 UTD1000L Channel Setup
The channels have their own setup menus. Repeat pressing CHANNEL to toggle
between CH1 and CH2 menus and display corresponding menu options as shown below:
Figure 6-1 Channel Menu Setup
Please see channel menu in the following table:
Table 6-1B
Channel
Off
On
Turn off CH1 or CH2 waveform
Turn on CH1 or CH2 waveform
Coupling
DC
AC
GND
AC&DC components pass
DC component is blocked
Display DC level when the channel input terminal is
equivalently grounded.
Probe
Factor
1×
10×
100×
1000×
Select one of them to match to the probe, to ensure accurate
reading. Four types are available: 1×, 10×, 100×, 1000×;
Invert
Off
On
To display the waveform normally.
To invert the waveform display
Loading ...
Loading ...
Loading ...