Loading ...
Loading ...
Loading ...
UTD1000L User Manual 63
Figure 6-19 Display Selected Parameters
Note: Parameter selection is to measure parameter immediately. There are 19 types of
parameter measurements for UTD1000CL and 22 types available in UTD1000DL. Under general
circumstances, not all parameters, but just some of them are required to be measured.
Therefore the users can customize their measurements as expected. The software can select
up to 4 parameters displayed on the screen.
Auto Parameter Measurements
Figure 6-20 Voltage Measurement
The voltage parameters that the Oscilloscope can automatically measure include:
Maximum Value (Vmax): Voltage measured from the highest point of waveform to the zero
ground
Minimum Value (Vmin): Voltage measured from the lowest point to the ground
Top Value (Vtop): Voltage measured from the flat top to the ground.
Base Value (Vbase): Voltage measured from the base of the waveform to the ground
Loading ...
Loading ...
Loading ...