Loading ...
Loading ...
Loading ...
UTD1000L User Manual 15
Chapter 4 Using Basic Oscilloscope Functions
4.1 About the Chapter
This chapter only briefs users on basic functions of the Oscilloscope, for example, how to
use menus and execute basic operations, not a step-by-step introduction on all functions.
4.2 Powering on the Oscilloscope
UTD1000L Series can be powered by: the battery and power adaptor. The power supply
voltage from the adaptor is DC9V/1.5A. To operate the Oscilloscope normally, please use the
power adaptor specified for the Oscilloscope.
Press Power button and SHIFT light illuminates for 3 seconds, then the Oscilloscope logo
appears, indicating the Oscilloscope has already turned on.
4.3 Describing the Display
Figure 4-1 Display Interface
Besides the waveform, there are still a lot of details about the waveform and oscilloscope
control settings on the screen:
1. Trigger source status:
CH1/CH2: indicates you can adjust the waveform of this channel
REF: indicates you can adjust the recalled waveform.
FFT: indicates you can execute FFT operation on the waveform.
2. Trigger coupling:
AC ac-coupled
DC dc-coupled
HF high-frequency reject
3. Trigger level readout
4. Trigger status:
ARMED The Oscilloscope is acquiring all pre-trigger data and ignores all trigger events;
READY The Oscilloscope has acquired all pretrigger data and is ready to trigger;
Loading ...
Loading ...
Loading ...