Loading ...
Loading ...
Loading ...
Arbitrary Waveform Generation
Modifying Arbitrary Waveforms 9
waveform can be copied into itself (block copy) and position markers for use at
SYNC OUT can also be defined.
Pressing the exit soft-key on any of these edit screens will return the display to the
EDIT FUNCTIONS menu.
Point Edit
Press the point edit… soft-key to call the POINT EDIT screen:
POINT EDIT
(addrs, value)
(00512, +0500)
exit next point
To see the data value at a point, press the soft-key on the left adjacent to the numeric
address and enter the point address directly from the keyboard or by using the rotary
control. The current data value is displayed to the right of the address.
To change the value press the soft key on the right adjacent to the numeric value and
enter the new value directly from the keyboard or by using the rotary control. Changing
the data value automatically updates the waveform.
Pressing the next point soft-key automatically advances the address by one point.
Line Edit
Press the line draw… soft-key to call the LINE screen:
LINE (addrs, value)
frm (00512, +0500)
to (00750, +0412)
exit draw line
The display shows a frm (from) and to address which will be the points between
which a straight line will be created when the draw line soft-key is pressed. The
default frm address is the first point on the waveform or the point most recently edited
if point edit has been used.
Set the "from" address and value by pressing the appropriate soft-key and making an
entry direct from the keyboard or by using the rotary control; repeat for the "to" address
and value.
The linear interpolations will be calculated for the addresses between the two selected
points when the draw line soft-key is pressed.
Wave Insert
Pressing wave insert… calls the wave insert screen:
9-9
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...