Loading ...
Loading ...
Loading ...
281, 282, 284
Users Manual
16-22
Remote Command Summary
Table 16-1. Remote Command Summary
*
CLS Clear status.
*
ESE <nrf> Set the Standard Event Status Enable
Register to the value of <nrf>
.
*
ESE? Returns the value in the Standard Event
Status Enable Register in <nr1>
num
eric format.
*
ESR? Returns the value in the Standard Event
Status Regist
er in <nr1> numeric
format.
*
IDN? Returns the instrument identification.
*
IST? Returns ist
local message as defined by
IEEE Std. 488.2.
*
LRN? Returns the complete set up of the
instrument as
a hexadecimal character data
block approximately 842 bytes long.
*
OPC Sets the Operation Complete bit (bit 0) in
the Standard
Event Status Register.
*
OPC? Query operation complete status.
*
PRE <nrf> Set the Parallel Poll Enable Register to the
value <nrf>
.
*
PRE? Returns the value in the Parallel Poll
Enable Register in <nr1>
numeric
format.
*
RCL <nrf> Recalls the instrument set up contained in
store num
ber <nrf>.
*
RST Resets the instrument parameters to their
default values.
*
SAV Saves the complete instrument set up in the
store num
ber <nrf>. Valid store numbers
are 1 - 9.
*
SRE <nrf> Set the Service Request Enable Register to
<nrf>
.
*
SRE? Returns the value of the Service Request
Enable Register in <nr1>
numeric
format.
*
STB? Returns the value of the Status Byte
Register in
<nr1> numeric format.
*
TRG This command is the same as pressing the
MAN T
RIG key.
*
TST? The generator has no self-test capability
and the response is alway
s 0<rmt>.
*
WAI Wait for operation complete true. Executed
before the next operation i
s started
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...