FLUKE 282-U Arbitrary Waveform Generator and Manager, 40 MS/s, 2 Channel

User Manual for the Fluke 282-U Arbitrary Waveform Generator and Manager, 40 MS/s, 2 Channel - Page 18

For 282-U.

PDF File Manual, 160 pages, Read Online | Download pdf file

282-U photo
Loading ...
Loading ...
Loading ...
Introduction and Specifications
Specifications 1
1-5
Delay:
range:
resolution:
-99·99 s to + 99·99 s
0·002 % of period or 25 ns, whichever is greater
Width:
range:
resolution:
25 ns to
99·99 s
0·002 % of period or 25 ns, whichever is greater
Note that the pulse width and absolute value of the delay
may not exceed the pulse period
at any time.
Pulse trains of up to 10 pulses may be specified, ea
ch pulse having independently defined
width, delay and level. The baseline voltage is separately defined and the sequence
repetition rate is set by the pulse train period.
Arbitrary
Up to 100 user defined waveforms may be stored in the 256K poi
nt non-volatile RAM.
Waveforms can be defined by front panel editing controls or by downloading of
waveform data via RS232 or GPIB.
Waveform memory size: 64K points per channel. Maxim
um waveform size is 64K
points, minimum waveform size is 4 points
Vertical resolution: 12 bits
Sample clock range: 100 mHz to 40 MHz
Resolution: 4 digits
Accuracy: ± 1 digit of setting
Sequence
Up to 16 waveforms may be linked.
Each waveform
may have a loop count of up to 32,768.
A sequence of waveforms can be looped up to 1,048,575 times or run continuously.
Output Filter
Selectable between 16 MHz elliptic, 10 MHz elliptic, 10 MHz Bessel, or none.
Operating Modes
Triggered Burst
Each active edge of the trigger signal produces one burst of the waveform
.
Carrier waveforms: All standard and arbitrary
Maximum carrier
frequency
:
The smaller of 1 MHz or the maximum for the selected
waveform.
40 M samples/s for arb and sequence.
Number of cycles: 1 to 1,048,575
Trigger repetition rate: 0.005 Hz to 100 kHz internal
DC to 1 MHz external.
Trigger signal source: Internal from keyboard,
previous channel, next channel or
trigger generator.
External from TRIG IN or remote interface.
Trigger start/stop phase: ± 360 ° settable with 0.1 ° resolution, subject to waveform
frequency
and type.
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...