Loading ...
Loading ...
Loading ...
Remote Operation
Remote Commands16
16-19
FORCETRG Force a trigger to the selected channel. Will
function with any trigger source except
MANUAL specified.
Modulation Commands
MOD <cpd> Set the modulation source to <OFF>
,
<EXT> or <PREV>.
MODTYPE <cpd> Set the modulation type to <AM>
or
<SCM>.
AMDEPTH <nrf> Set the depth for amplitude modulation to
<nrf>
%.
SCMLEVEL <nrf> Set the level for SCM
to <nrf> Volts.
SUM <cpd> Set the sum source to <OFF>
, <EXT> or
<PREV>.
SUMATN <cpd> Set the sum input attenuator to <0dB>,
<10dB>
, <20dB>, <30dB>, <40dB>
or <50dB>.
SUMRATIO <nrf> Set the sum ratio to <nrf
>.
Phase Locking Commands
REFCLK <cpd> Set the REF CLOCK IN/OUT to <IN>
,
<OUT>, <MASTER> or <SLAVE>.
ABORT Aborts an external phase locking operation.
PHASE <nrf> Set the generator phase to <nrf>
degrees.
This parameter is used for phase locking
and trigger/gate mode start/stop phase.
LOCKMODE <cpd> Set the channel lock mode to <INDEP>
,
<MASTER>, <FTRACK> or <SLAVE>.
LOCKSTAT <cpd> Set the inter-channel lock status to <ON>
or <OFF>
.
Status Commands
*
CLS Clear status. Clears the Standard Event Status
Register, Que
ry Error Register and Execution
Error Register. This indirectly clears the
Status Byte Register.
*
ESE <nrf> Set the Standard Event Status Enable Register
to the value of <nrf>
.
*
ESE? Returns the value in the Standard Event Status
Enable Register in <nr1>
numeric format.
The syntax of the response is <nr1><rmt>.
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...