FLUKE 282-U User Manual for the Fluke 282-U Arbitrary Waveform Generator and Manager, 40 MS/s, 2 Channel

Loading ...

Remote Operation

Remote Command Summary16

16-27

SYNCOUT <cpd> Set the sync output <ON>, <OFF>,

<AUTO>, <WFMSYNC>, <POSNMKR>,

<BSTDONE>, <SEQSYNC>,

<TRIGGER>, <SWPTRG> or

<PHASLOC>.

TONEEND <nrf> Delete tone frequency number <nrf>

thus defining the end of the list.

TONEFREQ <nrf1>,<nrf2>,

<nrf3>

Set tone frequency number <nrf1> to

<nrf2> Hz. The third parameter sets the

tone type; 1 will give trig, 2 will give FSK,

any other value gives gate.

TRIGIN <cpd> Set the trig input to <INT>, <EXT>,

<MAN>, <PREV>, <NEXT>, <POS> or

<NEG>.

TRIGOUT <cpd> Set the trig output to <AUTO>,

or <BSTDONE>.

TRIGPER <nrf> Set the internal trigger generator period to

<nrf> sec.

VAIN <cpd> Set the MODULATION or SUM input to

<VCA>, <SUM> or <OFF>.

WAVE <cpd> Select the output waveform as <SINE>,

<SQUARE>, <TRIANG>, <DC>,

<POSRMP>, <NEGRMP>, <COSINE>,

<HAVSIN>, <HAVCOS>, <SINC>,

<PULSE>, <PULSTRN>, <ARB> or

<SEQ>.

WAVFREQ <nrf> Set the waveform frequency to <nrf>

Hz.

WAVPER <nrf> Set the waveform period to <nrf> sec.

ZLOAD <cpd> Set the output load, which the generator is

to assume for amplitude and dc offset

entries, to <50> (50 Ω), <600>

(600 Ω) or <OPEN>.

1.888.610.7664 sales@GlobalTestSupply.com

Fluke-Direct.com

Loading ...

FLUKE 282-U Arbitrary Waveform Generator and Manager, 40 MS/s, 2 Channel