Loading ...
Loading ...
Loading ...
When the phone rings, the printer automatically answers after the number of rings you set in the Rings to
Answer setting. The printer begins emitting fax reception tones to the sending fax machine and receives the
fax.
If you encounter problems setting up the printer with optional equipment, contact your local service provider
or vendor for further assistance.
Set up the printer with a computer DSL/ADSL modem
If you have a DSL line and use that phone line to send faxes, follow these instructions to set up your fax.
1 Telephone wall jack.
2 Parallel splitter.
3 DSL/ADSL lter.
Connect one end of the phone cord to the 1-LINE port on the back of the printer. Connect the other
end of the cord to the DSL/ADSL lter.
You might need to connect the phone cord to your country/region adapter.
4 Computer.
5 Computer DSL/ADSL modem.
NOTE: You need to purchase a parallel splitter. A parallel splitter has one RJ-11 port on the front and two
RJ-11 ports on the back. Do not use a 2–line phone splitter, a serial splitter, or a parallel splitter which has two
RJ-11 ports on the front and a plug on the back.
Figure 5-7 Example of a parallel splitter
To set up the printer with a computer DSL/ADSL modem
1. Obtain a DSL lter from your DSL provider.
2. Connect one end of the phone cord to the DSL lter, and then connect the other end to the port labeled
1-LINE on the back of the printer.
NOTE: You might need to connect the phone cord to your country/region adapter.
ENWW Additional fax setup 75
Loading ...
Loading ...
Loading ...