Owner’s Manual - Page 295

For HC-X20. Also, The document are for others Panasonic models: HC-X2, HC-X2GGD, HC-X20GGD

Loading ...
Loading ...
Loading ...
Notes Warning system
295
Message
Screen display
Description Behavior and cause
Camera image screen
[FUNCTIONS THAT HAVE BEEN
STOPPED CAN NOW BE USED.]
Functions that were stopped due to a
temperature increase in the unit have
been released for use again.
[CANNOT PLAY.] This is a clip that cannot be played
back.
(When it cannot be played back due to
difference of the system frequency,
etc.)
An error has occurred during
playback, and the playback has
stopped.
Confirm if the system frequency of the clip is the same as
the system frequency of the unit.
Check the clip.
[CANNOT DELETE.] This is a clip that cannot be deleted.
Match the device and content versions.
[CANNOT RECORD. THE NUMBER
OF CLIPS HAS EXCEEDED THE
MAXIMUM LIMIT.]
The number of clips that can be
recorded has reached the maximum.
Replace the memory card or delete unnecessary clips.
[CARD ERROR. PLEASE
REFORMAT.]
Formatting of the memory card has
failed.
Format it again.
[CANNOT COPY TO SAME CARD.] The clip recorded over multiple
memory cards cannot be copied to a
same card.
Copy to a card not containing a clip that is recorded over
multiple memory cards.
[Repair failed.] Repairing the clip where an error
occurred has failed because the
power was disconnected or the
memory card was removed during
recording.
Restoring of the management
information has failed.
Check the memory card.
[UNABLE TO FORMAT.] This memory card cannot be
formatted.
Check the memory card.
[CANNOT PROTECT.] This is a clip that cannot be protected.
Match the device and content versions.
[THE CLIP IS PROTECTED. PLEASE
CANCEL PROTECTION.]
The clip is protected so it cannot be
deleted.
Cancel the protect on the clip.
[THUMBNAIL DATA ERROR IS
DETECTED.]
An error occurred in the thumbnail
information of the memory card.
Restoring of the management information is performed
automatically after this.
[CANNOT RECORD -
INCOMPATIBLE CONTROL DATA.]
The version of the management
information on the memory card is not
supported.
Match the device and content versions.
[CANNOT SET.] This cannot be set.
Perform the setting after making it possible to set.
[THIS CLIP CANNOT BE COPIED.] The clip cannot be copied.
Copy the clips other than the corresponding clip.
[CONTROL DATA ERROR HAS
BEEN DETECTED. (SD CARD)]
An error occurred in the management
information of the memory card.
Restoring of the management information is performed
automatically after this.
[COPY FAILED. PLEASE CHECK
THE CARD.]
The clip has failed to copy due to an
error in the memory card.
Check the memory card.
[CANNOT COPY - THE NUMBER OF
CLIPS HAS REACHED MAXIMUM.]
The number of clips that can be
copied has reached the maximum.
Replace the memory card in the copy destination or delete
unnecessary clips.
[LOW BATTERY. PLEASE CONNECT
AC ADAPTOR OR CHANGE
BATTERY.]
It is trying to copy a clip or update the
firmware of the unit when the
remaining battery level is insufficient.
Replace with a fully charged battery, or connect the AC
adaptor.
[CANNOT PLAY THIS CLIP ON THIS
MODEL.]
This is a clip that cannot be played
back with the unit.
Playback on a device that can playback.
[Cannot copy: contains recordings
from other devices.]
The clip recorded in other device
cannot be copied.
Copy the clips other than the corresponding clip.
[INVALID] Operation is disabled.
Operate after the operation becomes enabled.
[Cannot record - Playlist capacity is
full.]
The unit tried to record on a memory
card where the number of playlists for
recording has reached the maximum.
Replace the memory card or delete unnecessary clips.
[Cannot copy - Playlist capacity is full.] The unit tried to copy to a memory
card where the number of playlists for
recording has reached the maximum.
Replace the memory card or delete unnecessary clips.
[Exceeds capacity. Please reselect.] The remaining recording capacity of
the memory card for the copy
destination is insufficient.
Select the clip to copy again, or secure enough space in
the remaining recording capacity on the memory card for
the copy destination.
Loading ...
Loading ...
Loading ...