Loading ...
Loading ...
Loading ...
Network Connection – Connecting to the iPhone/iPad or Android terminal
279
Setting the standby port number
Depending on the environment, set the port number for standby if required.
1
Set the port number in the [NETWORK] menu ¨ [IP REMOTE] ¨ [HC ROP PORT].
Checking/deleting user accounts
1
Select the [NETWORK] menu ¨ [IP REMOTE] ¨ [ACCOUNT LIST].
The list of registered user accounts is displayed.
• Proceed to Step 4 to only check user accounts.
2
Select the user account to be deleted.
3
When the confirmation message is displayed, select [SET].
4
Select [ ] and end the operation.
Preparing the HC ROP app
Install the HC ROP app to the iPhone/iPad or Android terminal.
For iPhone/iPad
• Download the HC ROP app from the App Store.
For Android terminal
• Download the HC ROP app from the Google Play Store.
Connecting to the HC ROP app
Connect to the unit following the HC ROP app guide.
Operation while the HC ROP app is connected
Operation of the unit that is connected
The <THUMBNAIL> button cannot be used.
Recording and playback operation while connected
• Recording can be operated by either the unit or the HC ROP app.
• Playback operation is not possible.
• The setting value is not reflected until the [NETWORK] menu ¨ [IP REMOTE] ¨ [ENABLE/DISABLE] is switched to
[DISABLE] once, or when the camera is restarted.
• Number 80 and the same value as the port number set for other menu item cannot be specified.
• The TCP port set as the setting value and the UDP port set as the setting value +1 will be used.
• Inquire the administrator of the network or the controller whether change is required.
• For information such as the supported OS of the HC ROP app, refer to the App Store or the Google Play Store download
page.
• Change the connection destination port number in HC ROP app if the standby port number is changed in this unit.
• The unit cannot connect with the HC ROP app while the menu or thumbnail screen is displayed.
• For details about operation of the HC ROP app, refer to the help for the HC ROP app.
• The content set with the remote operation using the HC ROP app is reflected to the unit. (Excluding setting by hard switch)
Loading ...
Loading ...
Loading ...