Loading ...
Loading ...
Loading ...
S6L Control Surface Overview 30
Momentary and Latching Modes
Fine supports momentary and latching operation.
Momentary
In momentary mode, Fine stays in effect for as long as you hold down that modifier switch.
Latching
In latching mode, Fine stays in effect until you explicitly clear its active state.
To use Fine in momentary mode:
1 Press and hold Fine.
2 Adjust a channel, parameter, or processor.
3 Release Fine.
To use Fine in latching mode:
1 Double-press Fine. The switch LED lights.
2 Select or adjust one or more channels, parameters, or processors.
3 Press Fine again to exit latching mode.
OK
OK confirms the current operation, such as confirming assignments made in Multi-Select mode, or dismisses dialogs such as the
Waiting for Device dialog.
Cancel (Esc)
Cancel exits the current operation, such as exiting Multi-Select mod. Holding cancel also unlocks the system if it has been locked.
Snapshot Controls
The S6L control surface provides Snapshot controls in two locations on the MLM: in the Snapshots section and the Prev/Next
switches, below the right-hand MLM display. For more information on using Snapshots, see
Snapshots.
Snapshots Section
You can target (select), store, recall, and preview snapshots using the controls in this section.
Select Encoder and Displays
Turning the select encoder scrolls through and selects the targeted snapshot in the Snapshots list. The
displays show the number and name of the currently targeted snapshot.
Store
Saves the current state of all console parameters in the targeted snapshot. This switch mirrors the Store button on the Snap-
shots page.
Recall
Loads the targeted snapshot. This switch mirrors the Recall button on the Snapshots page.
Preview
Enables Snapshot Preview mode, and mirrors the Preview button on the Snapshots page. Preview mode lets you recall,
store and edit snapshots without affecting the current mix. See Preview Mode for more information.
Snapshots section
VENUE | S6L
Recall
Store
SNAPSHOTS
Preview
001/011
reset all inputs
S1Cu2
001 3
P:S1C1
N:S1C3
S1Cu3
S1Cu2
Loading ...
Loading ...
Loading ...