Loading ...
Loading ...
Loading ...
Soloing and the Monitor Buses 169
3 On the external screen, do the following:
• Go to the Inputs or Outputs page, and navigate to the desired channel using the provided tabs and buttons.
• Select the Channel Safe switch for the desired channel, located at the top of each fader strip.
Solo Safe a channel using the CKM:
1 Bank the desired channel to the faders.
2 Select the to Automation Safe so it lights, and then press the INPUT Channel Control Function switch so it lights.
– or –
• Touch the channel’s Input touch zone on the associated Channel Touch Module (CTM).
3 Locate the Solo Safe encoder, indicated by Solo Sf on the encoder display, and press the encoder.
The encoder In switch lights green, and the channel is Solo Safed.
Solo Safe status for the channel is indicated as follows:
• On the control surface channel strip, the S LED lights yellow.
• In the Input section of the MTS and CTM Channel view for the channel, S lights yellow.
• On the external screen the Safe button flashes green and shows the letter S (A appears if the switch is acting as an Automation
Safe, and B appears if it is acting as a Bank Safe).
Automation Safe parameter on a CKM encoder
Indications that a channel is Solo Safed on the channel strip (left) the MTS/CTM Channel view (center) and on the external screen (right)
In
Sel
Solo Sf
Select
Solo
Y
X
Mute
AS B
CH 1
Ch 1
0.0 dB
Loading ...
Loading ...
Loading ...