Loading ...
Loading ...
Loading ...
Working with Aux Sends 140
Adjusting Stereo Sends in Channel Control Mode
You can combine any two Aux outputs into a single stereo Aux output using Make Stereo (see Make Selected Mono Strips Ste-
reo/Make Selected Stereo Strip Mono). With stereo Auxes, you can pan send signals across the stereo pair, or panning can fol-
low channel pan (enabled per-Aux on the Options > Buses page of the external software).
On CKM encoders, stereo Aux Send controls are combined into one encoder, which controls both level and pan.
To adjust a stereo Aux Send in Channel Control mode:
1 Bank to and select the desired channel.
2 Press the appropriate MIX Channel Control Function switch or CTM touch zone to access the
desired stereo Aux Send.
The stereo send is available on a single encoder.
3 To adjust stereo Aux Send level, rotate the encoder.
4 To adjust send pan, do the following:
• Press the corresponding encoder Sel switch so it lights. Send pan is now targeted to the
corresponding encoder, the color in the corresponding encoder display inverts, and P
<Aux number/name> and pan value appears in the display.
• Rotate the encoder to adjust send pan.
Adjusting Aux Sends in Channel Strip Mode
You can control Aux Sends 1–4 on the CKMs in Channel Strip Mode.
To adjust Aux Sends in Channel Strip mode:
1 Bank the desired input or output channels.
2 Do either of the following to enable Channel Strip mode:
• Press a lit Select switch to de-select it and enable Channel Strip mode on the associated CKM.
• Press Select Clear to de-select all channels on the control surface and enable Channel Strip mode on all CKMs.
3 Navigate to the Aux Send Channel Strip mode parameter bank by pressing lit Parameter Bank switches, as available, until the
encoders appear purple.
Aux Sends 1–4 appear on the fifth page of Channel Strip mode parameters.
To toggle an Aux Send on/off:
Press the encoder under the display showing the Aux Send you want to adjust, such as Aux 1.
On is shown in the encoder display when the send is on. Off is shown when the send is off.
To adjust Aux Send level:
Rotate the encoder under the display showing the desired Aux Send.
To toggle an Aux Send pre-/post-fader:
Press the encoder In switch under the display showing the desired Aux Send. The following control and on-screen elements in-
dicate that an Aux Send is pre-fader:
To adjust stereo send pan:
1 Press the corresponding encoder Sel switch so it lights. Send pan is now targeted to the corresponding encoder and P <Aux num-
ber/name> and pan value appears in the corresponding encoder display.
2 Rotate the encoder to adjust send pan.
When two Aux outputs are made stereo, no blank strips are created or inserted, and channels in the layout in that bank are
shuffled to the left, including the corresponding Aux Sends.
In
Sel
P. Aux 1
<0>
On
Pan
Pre
CKM encoder showing Aux Send
pan targeted to the encoder
Loading ...
Loading ...
Loading ...