Loading ...
Loading ...
Loading ...
Events 319
Default Settings, Templates and Examples
Default Events
Each Demo Show file contains a set of default events that can be used as a starting point to build your own events. Some examples
of the types of default events for S6L include the following:
Examples
The following table provides a listing of example event definitions. Use the techniques explained throughout this chapter to add one
or more of the following events to establish your own set of events, triggers and actions.
Examples of default events
Default Event Type and Name Triggers Actions
Inputs (F1) Function Switch 1, Pressed Light Function Switch 1, On, While Active, Wait 0.0 sec.
Change View Mode - Inputs Page, Wait 0.0 sec.
Outputs (F2) Function Switch 2, Pressed Light Function Switch 2, On, While Active, Wait 0.0 sec.
Change View Mode - Outputs Page, Wait 0.0 sec.
Snapshots (F3) Function Switch 3, Pressed Light Function Switch 3, On, While Active, Wait 0.0 sec.
Change View Mode - Snapshots Page, Wait 0.0 sec.
Plug-Ins (F4) Function Switch 4, Pressed Light Function Switch 4, On, While Active, Wait 0.0 sec.
Change View Mode - Plug-Ins Page, Wait 0.0 sec.
Options(F5) Function Switch 5, Pressed Light Function Switch 5, On, While Active, Wait 0.0 sec.
Change View Mode - Options Page, Wait 0.0 sec.
Control (F6) Function Switch 6, Pressed Light Function Switch 6, On, While Active, Wait 0.0 sec.
Change View Mode - Control Page, Wait 0.0 sec.
Overview (F7) Function Switch 7, Pressed Light Function Switch 7, On, While Active, Wait 0.0 sec.
Change View Mode - Overview Page, Wait 0.0 sec.
Filing (F8) Function Switch 8, Pressed Light Function Switch 8, On, While Active, Wait 0.0 sec.
Change View Mode - Filing Page, Wait 0.0 sec.
Patchbay (F9) Function Switch 9, Pressed Light Function Switch 9, On, While Active, Wait 0.0 sec.
Change View Mode - Patchbay Page, Wait 0.0 sec.
To see the default (factory) Function key assignments, use the
Clear Console command.
Example Application of Event Elements, Triggers, and Actions
Example Application
Elements
Type
Menus Definition/Properties
If any input fader goes below
-60, mute that channel
Trigger
Control (Continuous) > Any Channel Any Channel, Fader, Below -60 dB
Action
Set Control (Switch) > Triggered Strip Triggered Strip, Mute
If any Input Channel meter
stays above +3 dB for 2 sec-
onds, engage Gain Guess on
that channel
Trigger
Meter > Any Channel Any Channel Meter, Above, +3 dB, 2 sec.
Action
Set Control (Switch) > Triggered Channel Triggered Strip, Input > Gain Guess, On
If any Input Channel meter
stays above +3 dB for more
than 3 seconds, lower the input
level on that channel by -3 dB
Trigger
Meter > Any Channel Any Channel Meter, Above, +3 dB, 3 sec.
Action
Set Control (Continuous) > Triggered Strip Triggered Strip, Fader, Relative, -3 dB
Pressing a Channel Color
switch puts that channel’s
Direct Out level on its fader
Trigger
Control (Switch) > Any Strip Any Strip, Color Switch, Pressed
Action
Continuous Control on Fader > Triggered
Strip
Triggered Strip, Direct Out, Toggle
Loading ...
Loading ...
Loading ...