Loading ...
Loading ...
Loading ...
Adjusting Channel Parameters 106
Adjusting Channel Parameters
This chapter describes the following:
•
Assigning Channels to Outputs
• Adjusting Input Parameters on the Control Surface
• Adjusting EQ on the Control Surface
• Adjusting Dynamics on the Control Surface
• Adjusting Plug-Ins on the Control Surface
• Using the CHANNEL Function
• Flipping Parameters to Faders (Flip to Faders Mode)
• Encoder Assign Mode
Configuring and Patching Channels
Before adjusting channels, make sure you have configured your Mains and Mix Buses, patched hardware I/O to input and output
channels, and configured channels as desired (such as naming channels and making stereo channels). See the following for more
information:
Configure Mains and Mix Buses (Aux and Groups) on the System > Options page. See
Configuring Mains and Mix Buses.
Patch hardware I/O to input and output channels using the VENUE Patchbay. See Patching Input Sources to Input Channels
for more information.
Name channels, combine two mono channels into one stereo channel (make stereo), reorder input channels, and insert blank
channel strips using the Inputs and Outputs pages of the external screen. See
Configuring Channels on the External Screen for
more information.
You can also adjust many channel parameters using the external VENUE software screen. See
Adjusting Parameters on
the External Screen for more information.
Loading ...
Loading ...
Loading ...