Loading ...
Loading ...
Loading ...
Overview, Inputs, and Outputs Pages 195
To split a stereo channel into two mono channels:
1 Put the system into Config mode.
2 Attention the stereo channel you want to split.
3 Touch-and-hold (right-click) the attentioned channel and choose Split Selected Stereo Strip to Mono.
The stereo channel is split, placing the channels next to each other on the control surface and in the Patchbay. Delete blank strips
manually to maintain channel layout, if necessary.
Move Selected Strip
You can move an attentioned Input, Aux, Group, or Matrix strip from its current position to a new location. When you move a chan-
nel using Move Selected Strip, other channels are moved (and renumbered) lower or higher to accommodate the moved channel.
To move a Channel strip:
1 Put the system in Config mode.
2 Go to the Inputs or Outputs > Auxes, Groups, or Matrixes page and attention the channel whose parameters you want to move.
3 On-screen, touch-and-hold (right-click) on the destination strip (where you want to move the attentioned channel).
4 Choose Move Selected Strip Here from the pop-up menu. The channel strip is moved before the destination strip.
Inserting Blank Strips
(Input Channels Only)
The Insert Blank Strip command lets you insert one or more blank (or “spacer”) strips anywhere among your input channels. In ad-
dition, blank strips are automatically inserted when you use the Make Stereo command to convert two mono input channels into a
single stereo channel, preserving the channel layout.
Blank strips are strictly placeholders (no audio or any type or processing take place), and therefore consume no additional process-
ing overhead or DSP resources. Use blank strips to create obvious divisions between groups of instruments, or to optimize the bank
placement of inputs on the console. Blank strips are saved and loaded as part of the Show file.
Blank Strips on the Control Surface
A blank strip has no LCD channel name display, and all of its physical controls and indicators are inactive. Blank strip faders are
set to the bottom (–inf) position and always revert to this position if moved.
Blank Strips On-Screen
On the MTS Universe view, blank strips appear as blank Channel Tiles. On the external screen, blank strips appear as a simple gray
strip with no fader, buttons or meter. Insert and remove blank strips on the external screen.
Snapshots cannot store and recall custom console channel positions.
You can also drag and drop channels. See
Reordering Channels Using Drag and Drop.
Loading ...
Loading ...
Loading ...