Loading ...
Loading ...
Loading ...
Overview, Inputs, and Outputs Pages 198
Input Channel, EQ, and Dynamics Presets
You can use Presets to store and load input channel settings, built-in channel EQ and GEQ settings, and Dynamics settings from
the Inputs and Outputs pages.
Input Channel Presets
You can store and load input channel configurations as Input Channel Presets. Input Channel Presets can be previewed, loaded and
transferred just like other Preset files, letting you quickly configure channels from among a library of favorite setups.
When an Input Channel is stored or recalled as a preset, all parameters are affected except the following:
• Patchbay assignments, including Direct Outs
• Hardware and software insert (plug-in) assignments and in/out state.
To store a channel as an Input Channel Preset:
1 Adjust parameters as needed.
2 Go to the Inputs or Outputs page.
3 Attention the channel whose settings you want to save or load.
4 Under the channel name, select the Presets Folder icon to open the Input Channel Presets window.
5 Choose a Presets folder from the Folder pop-up menu.
6 Select New, enter a name for the Preset, then select OK, or choose Cancel to exit the Presets folder without making changes.
For information about managing Presets files and folders, see
Working with Presets
Choosing a preset automatically loads the saved settings into the attentioned channel. Depending on the stored settings this may
dramatically change channel level and signal routing. Use caution when previewing Input Channel Presets with a live source.
Channel Presets icon in the Inputs page
See
Creating Preset Folders to create your own Presets folder so they show up in a Presets Folder pop-up menus.
Input Channel Presets window showing the Folder pop-up menu (top) and the New and OK buttons (bottom)
Loading ...
Loading ...
Loading ...