Loading ...
Loading ...
Loading ...
S6L Control Surface Overview 24
Channel Control Functions
The Channel Control Function switches assign groups of parameters for the currently selected channel to the 32 encoders on the
CKM.
The labels below each switch indicate the type of parameters assigned to the CKM, as follows:
1 – CHANNEL
CHANNEL spills a variety of channel parameters such as input, EQ, and Dynamics parameters to the CKM, providing a default set
of utility parameters for the selected channel. You can also customize the parameters CHANNEL spills to the encoders. See
Using
the CHANNEL Function for more information.
2 – INPUT
INPUTS spills parameters such as gain, LPF, HPF, pad, pan, phantom power (48V), polarity, channel delay, channel safes, Direct
Out level, input source toggle, and Mains bus assign controls to the CKM. The available parameters depend on the type of channel
selected.
3 – EQ
For input channels, EQ spills the built-in 4-band EQ plus high- and low-pass filters to the CKM. For output channels, EQ spills
built-in 7-band EQ plus high- and low-pass filters to the CKM. If a graphic EQ (GEQ) is inserted on an output channel, pressing
a lit Parameter Bank switch spills GEQ parameter to the encoders.
4 – DYNAMICS
DYNAMICS spills the built-in Expander/Gate (input channels only) and Compressor/Limiter to the CKM.
5 – PLUG-INS
PLUG-INS assigns four Plug-In Selectors to the leftmost column of encoders, each of which corresponds to one of the four channel
Insert slots. Pressing a Plug-In Selector spills the parameters for that plug-in to the rest of the encoders on the CKM.
6 – MIX
The three MIX switches spill Aux, Group, or Matrix Mixer controls to the associated CKM. The type and number of Aux/Group-re-
lated parameters the MIX switches assign to the CKM is determined by the global Mix Bus configuration as set on the Options >
System page (see
System Configuration for more information).
The MIX switches spill the following parameters to the CKM, depending on the type of channel selected:
Aux Sends
When you select an input channel, the MIX switches spill Aux sends and/or Group bus assignment controls to the CKM.
You can assign the channel to Auxes/Groups, and adjust Aux send levels. Each MIX switch spills Aux Sends in sets of 32 channels,
as available. Groups are always accessed via MIX switch three (the rightmost MIX switch).
Members
When you select a Mains output, an Aux output, a Group output, or a VCA, the MIX switches spills the member channels
(the channels assigned to that bus or VCA) to the CKM, from which you can adjust the contributing levels of the member channels
to the selected bus or VCA. Each
MIX switch spills members in sets of 32 channels, as available.
Matrix Mixers
When you select a Matrix Mixer output, pressing any MIX switch assigns the available Matrix Mixer input controls
to the CKM, letting you turn Matrix Mixer inputs on/off and adjust Matrix Mixer input levels.
CKM Channel Control Function Switches
MIXMIXMIXPLUG-INSDYNAMICSEQINPUTCHANNEL
In
Sel
In
Sel
In
Sel
In
Sel
In
Sel
In
Sel
In
Sel
In
Sel
1 2 3 4 5 6 6 6
Loading ...
Loading ...
Loading ...