Loading ...
Loading ...
Loading ...
Soloing and the Monitor Buses 170
Using the Headphone Outputs
The front panel of the S6L-32D/24D/24C control surface provides two discrete headphone outputs (Phones A and B). S6L-16C
provide a single headphone output (Phones).
Configuring the Headphones Outputs
You can choose the Monitor bus that you want feeding each headphone output.
To configure the headphone output:
1 On the external screen, go to the Options > Busses page.
2 In the Headphones section, located the Phones A and Phones B pop-up menus. With S6L-32D/24D/24C, Phones A corresponds
to the left front-panel headphone jack, and Phones B corresponds to the right headphone jack.
3 Select a Phones pop-up menu, and choose one of the following:
• To feed Monitor Bus A to the headphone output, choose Mons A.
• To feed Monitor Bus B to the headphone output, choose Mons B.
Adjusting Headphone Level
Output level for each headphone output is controlled by its corresponding volume control located next to each headphone jack. The
overall level of the Monitor bus feeding the headphone output also contributes to the headphone level.
To adjust Headphone level:
Adjust the headphone volume control to adjust level as needed.
The headphone volume control is post-Monitor bus level. If no signal is present on headphones, make sure the level for the Mon-
itor bus is set properly.
Loading ...
Loading ...
Loading ...