Loading ...
Loading ...
Loading ...
Options 342
Interaction
The Interaction tab lets you configure behaviors for attentioned and selected channels the Channel Safe Switches; light bar, OLED
and touch screen brightness; Metering; Ethernet Control and VENUE Link network settings; and Flex Channels and VCA config-
uration.
Channel Selection
Options in this section determine how channels are attentioned on the external screen and the MTS.
To customize control surface and screen interaction:
1 Go to the Options page and select the Interaction tab.
2 Set the following Channel Selection options:
Change Attentioned Channel By
Let you specify how a channel is attentioned on the external screen and the MTS. Select any or
all of the following options:
• Touching Input Faders
• Engaging Input Solos
• Touching Output Faders
• Engaging Output Solos
Attentioning Changes View Mode
When selected, updates the on-screen display to show the page for the currently attentioned
channel. When this option is deselected, the on-screen display does not update when a channel is targeted.
Attention Follows Select
When selected, any channel that is selected using the channel strip Select switch is also attentioned,
and is the default setting. When deselected, select and attention are decoupled.
Select Follows Solo
When selected, engaging Solo on any channel that is currently banked to the faders also selects that channel.
Solo can be engaged from the CFM, MTS, or external screen, but the channel must already be banked to the control surface to en-
gage local Select.
Position Safe When Spilling
When enabled, spilling a VCA, Aux, Group, or Matrix leaves the “master” (the channel from which
you initiated spill) in place on the surface, and spilled channels spill around the master. In effect, a “Spill Safe” state for the VCA,
Aux, Group, or Matrix. You can unspill by pressing Attention on that master strip. When not enabled, spilling a VCA, Aux, Group,
or Matrix replaces channels on as many strips as needed for the spill, except for any Bank Safed strips.
Interaction tab of the Options page (S6L-32D/24D)
Loading ...
Loading ...
Loading ...