Loading ...
Loading ...
Loading ...
Oven ControS,Clock and Timer
Clock
The clock must be set for the automatic oven timing
functions to work properly.. The time of day cannot be
changed during a Timed Baking or a Self-Cleaning
cycle°
To Set the Clock:
1. Press the CLOCK pad.
2. ress the INCREASE or DECREASE pad
to set the time of day_
3. Press the CLOCK pad to start.
Power Outage
After a power outage, when power is restored the dis-
play will flash and time shown will no longer be cor-
rect--for example after a 5-minute power interruption
the clock will be 5 minutes slow.
All other functions that were in operation when the
power went out will have to be programmed again.
Timer
The timer is a minute timer only; it does not control
oven operations° The maximum setting on the timer
is 9 hours and 55 minutes.
To Set the Timer:
1. Press the TIMER pad.
2. ress the INCREASE or DECREASE pad
to set the amount of time on the timer..
The timer will start automatically within a
[_ few seconds of releasing the INCREASE or
DECREASE pad..
The timer, as you are setting it, will display
seconds until 1 minute is reached.
Then it will display minutes and seconds until 60
minutes is reached. After 60 minutes, it will display
hours ("HR" now appears in display) and minutes
until the maximum time of 9 hours and 55 minutes
is reached.
To Reset the Timer:
If "TIMER" is displayed, press the INCREASE or
DECREASE pad until the desired time is reached.
If "TIMER" is not displayed, press the "TIMER" pad
first, then follow the instructions above to set the timer.
To Cancel the Timer:
Press and hold the TIMER pad until the word
"TIMER" disappears from the display.
End of Cycle Tones
The end of cycle tone is a series of three beeps fol-
lowed by one beep every six seconds. If you would
like to remove the signal that beeps every six
seconds, press and hold the CLEAR/OFF pad for 10
seconds.
To return the signal that beeps every six seconds,
press and hold the CLEARIOFF pad for 10 seconds.
Display Messages
If "door" appears in the display, the oven door
is open. If "LOCK" appears in the display, the oven
door is in the locked position. BAKE, BROIL and
COOK TIME cannot be set if the door is in the locked
position_
Loading ...
Loading ...
Loading ...