Loading ...
Loading ...
Loading ...
PROBLEM POSSIBLE CAUSE
SURFACE LIGHT DOES • Fluorescent bulb is loose or defective. Adjust or replace,,
NOT WORK ° Switch operating light is broken, Call for service
OVEN WILL NOT o Oven temperature is too high to set self-cleaning operation,
SELF-CLEAN Allow the range to cool to room temperature and reset the controls.
o Door latch handle not moved all the way to the right.
OVEN DOOR WILL • The oven must cool below the locking temperature after the clean cycle
NOT UNLOCK is complete, Do not lock door with door latch except when using the
self-clean feature or the oven may lock.
° Press the CLEAR/OFF pad. Allow the oven to cool. Unlatch the door.
DOOR ACCIDENTALLY
LOCKED WHILE BAKING
OVEN NOT CLEAN AFTER
CLEAN CYCLE
"door" APPEARS
IN THE DISPLAY
OVEN CONTROL SIGNALS
AFTER ENTERING COOK
TIME OR STOP TIME
o Oven controls not set properly. See the Operating the Self-Cleaning
Oven section
o Heavily soiled ovens require 3'A to 4 hours of cleaning time.
° Heavy spilIovers should be cleaned up before starting clean cycle.
o Self-cleaning cycle has been selected but latch handle was not moved all the
way to the righL Move the latch handle.,
o Latch handle was moved to the right but a program other than self-cleaning
was selected_ Move the latch handle to the right only when setting self-
cleaning cycle,
o This is reminding you to enter a bake temperature (see the Baking section),,
47
Loading ...
Loading ...
Loading ...