Loading ...
Loading ...
Loading ...
©
2022 DJI All Rights Reserved.
57
AGRAS T40/T20 P
Unmanned Aircraft Flight Manual
Propellers
Disassembly
1. Remove the two M5×15 propeller blade screws using a proper hex key.
2. Remove the propeller adapter, the four Teon gaskets, and two rubber washers above and under
each propeller blade.
Reassembly
Identify the CW or CCW marks on the propeller blades and motors. Make sure to assemble the parts
with the same mark. T40 users can identify the upper (U) and lower (L) propeller blades with the
corresponding letter at the end of the model number on each propeller.
1. Place the one rubber washer and then two Teflon gaskets onto one of the mounting hole on the
motor. Place the propeller blade and then two Teon gaskets and one rubber washer.
2. Follow the same steps for the other mounting hole on the motor.
3. Place the propeller adapter on the top.
4. Insert the two M5×15 screws to the mounting holes and tighten to secure the propeller blades.
Sprinklers
Disassembly
1. Rotate and remove the screw and cover at the bottom of the sprinkler. Remove the centrifugal disk
module.
2. Separate the upper and lower disks.
3. Remove the washer on the lower disk.
Reassembly
Follow the steps of disassembly in reverse order for reassembly.
M5×15 Screws
Rubber Washers
Teflon Gaskets
Loading ...
Loading ...
Loading ...