Loading ...
Loading ...
Loading ...
• Staple finisher
• Staple, hole punch finisher or booklet finisher
• Optional 3000‑sheet tray
Note: The staple finisher is not supported if another finisher is installed. For more information on installing
the finishers and optional trays, see the instruction sheet that came with the option.
Installing optional trays
Notes:
• For information on installing the optional 3000-sheet tray, see the instruction sheet that came with the
option.
• Use the screwdriver located inside the bottom front door of the printer.
CAUTION—POTENTIAL INJURY: The printer weight is greater than 18 kg (40 lb) and requires two or
more trained personnel to lift it safely.
CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware
or memory devices sometime after setting up the printer, then turn the printer o, and unplug the power
cord from the electrical outlet before continuing. If you have any other devices attached to the printer,
then turn them o as well, and unplug any cables going into the printer.
CAUTION—TIPPING HAZARD: Floor-mounted
configurations
require additional furniture for stability.
You must use either a printer stand or printer base if you are using multiple input options. If you
purchased a printer with a similar configuration, then you may need additional furniture. For more
information, see
www.lexmark.com/multifunctionprinters.
The optional trays come with the following accessories:
Accessory name Quantity
Stabilizing feet
2
Additional printer setup 34
Loading ...
Loading ...
Loading ...