Loading ...
Loading ...
Loading ...
Use To
Factory Defaults
Do Not Restore
Restore Now
Restore the printer settings to the factory default settings.
Notes:
• Do Not Restore is the factory default setting. This keeps
the user‑defined settings.
• Restore Now returns all printer settings to the factory
default settings except Network/Ports menu settings. All
downloads stored in RAM are deleted. Downloads
stored in
flash
memory or on a printer hard disk are not
aected.
Export Configuration Package
Export
Export the printer configuration file to a flash drive.
Flash Drive
Print Settings menu
Use To
Copies
1–999
Specify a default number of copies for each print job.
Note: 1 is the factory default setting.
Paper Source
Tray [x]
MP Feeder
Manual Paper
Set a default paper source for all print jobs.
Note: Tray 1 is the factory default setting.
Collate
(1,1,1) (2,2,2)
(1,2,3) (1,2,3)
Stack the pages of a print job in sequence when printing multiple copies.
Note: “(1,2,3) (1,2,3)” is the factory default setting.
Sides (Duplex)
1 sided
2 sided
Specify whether prints are on one side or on both sides of the page.
Note: 1 sided is the factory default setting.
Staple
O
On
Specify whether prints are stapled.
Notes:
• O is the factory default setting.
• On allows the printer to staple print jobs.
• This menu appears only when a supported staple finisher is installed.
Hole Punch
O
On
Specify whether prints have holes for binding.
Notes:
• O is the factory default setting.
• This menu appears only when a supported staple, hole punch
finisher
is
installed.
Understanding the printer menus 107
Loading ...
Loading ...
Loading ...