Loading ...
Loading ...
Loading ...
To install a hard disk directly on the controller board cage:
a Align the standos of the hard disk to the holes in the controller board cage, and then press the hard
disk down until the standos are in place.
Installation warning: Hold the hard disk by its edges. Touching or pressing on the center of the hard
disk may damage it.
b Use the two provided screws to attach the hard disk mounting bracket.
c Insert the plug of the hard disk interface cable into the receptacle of the controller board.
Note: The plugs and receptacles are color‑coded.
Additional printer setup 31
Loading ...
Loading ...
Loading ...