Loading ...
Loading ...
Loading ...
4 Push the card firmly into place.
Warning—Potential Damage: Improper installation of the card may cause damage to the card and the
controller board.
Note: The entire length of the connector on the card must touch and be
flush
with the controller board.
Installing an Internal Solutions Port
Note: Use the screwdriver located inside the bottom front door of the printer.
The controller board supports one optional Lexmark Internal Solutions Port (ISP). Install an ISP for additional
connectivity options.
CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware
or memory devices sometime after setting up the printer, then turn the printer o, and unplug the power
cord from the electrical outlet before continuing. If you have any other devices attached to the printer,
then turn them o as well, and unplug any cables going into the printer.
Additional printer setup 26
Loading ...
Loading ...
Loading ...