Loading ...
Loading ...
Loading ...
Replace missing cartridge [31.xy]
Install the missing cartridge to clear the message. For more information, see “Replacing the toner cartridge”
on page 144.
Replace paper pick rollers in [paper source], use parts and instructions in
tray 1 or tray 2 compartment [80]
Try one or more of the following:
• Replace the pick rollers, and then touch Rollers replaced on the control panel to clear the message
and continue printing.
• Tou ch Replace later ( jams may persist) to ignore the message and continue printing.
Replace photoconductor, 0 pages remain [84.xy]
Replace the photoconductor unit to clear the message and continue printing. For more information, see the
instruction sheet that came with the supply or see
“Replacing a photoconductor unit” on page 137.
Note: If you do not have a replacement photoconductor unit, then see
“Ordering supplies” on page 135
or go to
www.lexmark.com.
Replace unsupported cartridge [32.xy]
Remove the toner cartridge, and then install a supported one to clear the message and continue printing.
For more information, see the instruction sheet that came with the supply or see the “Replacing supplies”
section of the User’s Guide.
Note: If you do not have a replacement cartridge, then see the “Ordering supplies” section of the User’s
Guide or visit
www.lexmark.com.
Replace unsupported photoconductor [32.xy]
Remove the photoconductor unit, and then install a supported one to clear the message and continue
printing. For more information, see the instruction sheet that came with the supply or see
“Replacing a
photoconductor unit” on page 137.
Note: If you do not have a replacement photoconductor unit, then see
“Ordering supplies” on page 135
or go to
www.lexmark.com.
Replace waste toner bottle [82.xy]
Replace the waste toner bottle to clear the message.
Restore held jobs?
Try one or more of the following:
• From the printer control panel, touch Restore to restore all held jobs stored in the printer hard disk.
• From the printer control panel, touch Do not restore if you do not want to restore any of the print jobs.
Troubleshooting 197
Loading ...
Loading ...
Loading ...