Loading ...
Loading ...
Loading ...
CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware
or memory devices sometime after setting up the printer, then turn the printer
o,
and unplug the power
cord from the electrical outlet before continuing. If you have any other devices attached to the printer,
then turn them o as well, and unplug any cables going into the printer.
Warning—Potential Damage: Controller board electronic components are easily damaged by static
electricity. Touch a metal surface on the printer before touching any controller board electronic components
or connectors.
1 Access the controller board.
For more information, see
“Accessing the controller board” on page 21.
2 Unpack the hard disk.
3 Locate the appropriate connector on the controller board cage.
Note: If an optional ISP is installed, then the hard disk must be installed onto the ISP.
Additional printer setup 29
Loading ...
Loading ...
Loading ...